Manual Steering Rack and Pinion Conversion Kit for 67-69 Camaro and 1968-74 Chevy Nova

Our exclusive designed manual steering Rack & Pinion kits for 1967-69 Chevy Camaro and 68-74 Chevy Nova are far superior than the competition and is the perfect solution to your steering performance needs. This kit is specifically designed for the stock frame. The racks come mounted to a simple one piece bracket that mounts up right behind the stock cross member at the rear lower control arm bolts. Simply slide out the original bolts and replace with the supplied longer bolts to install the rack. The manual rack has enough travel that steering arms are not necessary. These kits can be used with either the factory column or an aftermarket column. The Manual rack kits have been successfully used on cars with small block and big block motors. Headers can present an issue with clearence for the shaft linkage.

Note: Most aftermarket Heads have raised exhaust floors by 1/4" to 1/2" which does not make clearance any easier.

Best of all, this is a direct Bolt-on application. No chassis modifications needed. Hoses sold separately! It will also greatly improve your handling and steering, while maintaining road feel.
 

Note: Kit does not include pump, pump brackets, hoses or ujoint. Kit will work with OEM type drop spindles that require the bolt on steering arms.

***All rack and pinion kits are special, built to order items and ship directly from our manufacture.

May vary in appearance from image shown.

Note: Please allow 2-3 weeks for delivery