Home / Suspension Parts / 1962-74 Mopar, Plymouth, Dodge, Chrysler / Tubular Control Arms / 1962-74 Dodge Plymouth Chrysler Mopar B & E-Body Tubular Upper Control Arm Set

Performance Online (POL)

1962-74 Dodge Plymouth Chrysler Mopar B & E-Body Tubular Upper Control Arm Set

Part #:TCA-U6276BE

$416.50

Details

Performance Online's 1962-74 Mopar B and E body tubular control arms are designed for the performance enthusiast! We have designed extra caster into the arm to make the vehicle drive straight and true. These arms have greater ball joint contact area to eliminate pulling out of control arm and 3X the bushing contact area eliminating cracking often found on stock units. Comes complete with delrin bushings and new ball joints pre-assembled.

Kit includes:

Manufactured from 1.125" Diamter x .156 wall D.O.M. tubing
Completely TIG welded resulting in a stronger unit with a very professional appearance.
Greater ball joint contact surface to help eliminate the ball joint pulling out of the arm
Almost three times the bushing contact area helping to eliminate cracking often found in stock stamped steel arms.
Offers greater Caster and Camber adjustment resulting in improved high speed stability.
Comes complete with Delrin bushings and new ball joints.
Powder Coated Gloss Black.

Notes:

Will not work on 1973-74 with upper cross shaft control arms
Most cars will end up with 3-5 degrees of total positive caster, relative to ride height and the condition of the existing mounts.
Individual caster settings may vary by model. Typical is about 2-3 degrees.

CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

What does this fit?

B-BODY
62-64 Dodge Polara
65-74 Dodge Coronet
66-74 Dodge Charger
62-70 Plymouth Belvedere
65-74 Plymouth Satellite
67-71 Plymouth GTX
68-74 Plymouth Road Runner
63-64 Plymouth Sport Fury
E-BODY
70-74 Dodge Challenger, Plymouth Barracuda