Performance Online (POL)
1967-70 Chevy, GMC C10 Front and Rear Power Disc Brake Conversion, GM Truck
Details
Our 1967-70 Chevy & GMC truck disc brake conversion kits are high quality yet budget priced! Rear brake kit comes standard with GM ratcheting calipers and CNC laser cut caliper brackets. Note: Calipers include emergency brakes. Works with most 15" wheels. Our disc brake conversion has great features including our exclusive Western Chassis spindles available in stock height or 2.5" drop, 5 or 6 lug rotors and ball joints and tie rod ends. These systems not only upgrade your truck to disc brakes, they also use 73-87 GM ball joints and tie rod ends for improved geometry. Our booster kit will help your truck stop better than ever. These bolt on kits mount to the original firewall locations and use the factory pedal assembly
Kit includes:
- 12" High Quality Brake Rotors
- GM Brake Calipers and brake pads
- Caliper Brackets
- Bearings and seals
- Rubber Brake Hoses and banjo bolts
- Grease caps and spindle nuts
- Ball Joints and Tie Rod Ends
- High Performance Tie Rod Adjusting Sleeves
- Stock or 2.5" Drop spindles
- Emergency Brake Cables
- 11" Single Diaphragm Power Booster, Master cylinder and proportioning valve
- Hardware
- Brake lines
Available upgrades:
- Drilled and slotted rotors available, Add $169.30 set. Free zinc plating with rotor upgrade.
- Stainless brake hoses, Add $98.00 set.
- Powder coated calipers available in red or black, Add $130.62
Notes:
Moves front wheels out .75" per side when converting from factory drum brakes.
May not work with factory 15" drum brake wheels. Will not work with Dana rear ends.
Sets the wheels to the factory GM wheel width for disc brakes.The trac width is approx 64"
5 Lug Rotors = 5 x 5" Bolt Pattern (1/2"-20 Lug Nuts Required)
6 Lug Rotors = 6 x 5.5" Bolt Pattern (7/16"-20 Lug Nuts Required)
May not work with factory 15" drum brake wheels. Will not work with Dana rear ends.
Sets the wheels to the factory GM wheel width for disc brakes.The trac width is approx 64"
5 Lug Rotors = 5 x 5" Bolt Pattern (1/2"-20 Lug Nuts Required)
6 Lug Rotors = 6 x 5.5" Bolt Pattern (7/16"-20 Lug Nuts Required)
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov
What does this fit?
1967 1968 1969 1970 GMC C15, Chevy C10 Truck, Suburban and Blazer 2wd
