Home Suspension Parts :: 1960-87 Chevy, GMC C10, C15, C20 Truck :: Tubular Control Arms :: 1973-87 Chevy C10, GMC C15 Truck Tubular Upper and Lower Control Arm Set

1973-87 Chevy C10, GMC C15 Truck Tubular Upper and Lower Control Arm Set

1973-87 Chevy C10, GMC C15 Truck Tubular Upper and Lower Control Arm Set
1973-87 Chevy C10, GMC C15 Truck Tubular Lower Control Arms
Part #: TCA-UL7387
Weight: 95.00 lbs
Our price: $960.28

Click here to be notified of price drops for this item
Qty
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

Our 1973-87 Chevy and GMC truck tubular upper and lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring. We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearence. Works with drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.

Kit includes:

  • 2 upper control arms
  • 2 lower control arms 
  • Gloss Black powder coated
  • 1.250" x .188" DOM tubing
  • 4 cross shafts (installed)
  • 2 lower ball joints (If applicable)
  • 2 upper ball joints (If applicable)
  • Hardware
  • Limited Lifetime Warranty
  • Sold in sets

Notes:

Due to our improved design, these lower arms now require the use of our after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers.
Manufactured in the USA

Application:

1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer