Home Brakes :: 1957-68 CADILLAC :: Power Brake Conversions :: Hydro-Boost Hydraulic Brake Assist Booster

Hydro-Boost Hydraulic Brake Assist Booster

Hydro-Boost Hydraulic Brake Assist Booster
Hydro Boost Brake Booster Hydro-Boost hose kit - Stainless Steel Hydro-Boost hose kit - Rubber
Part #: HB-0000
Weight: 20.00 lbs
Our price: $409.99
Qty
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

The Hydro-Boost is powered by hydraulic pressure from the power steering pump. It requires 'no vacuum'. There are many advantages to the design of this hydraulic assisted power brake unit.

  • No external vacuum pump required on low vacuum high performance motors
  • Firewall and valve cover clearance is increased dimensionally the same as a 7" diameter vacuum booster
  • Frame mounted clearance is increased
  • Frame mounted Hydro-Boosts® are the same width as a master cylinder, giving additional exhaust clearance

The Hydro-Boost® can be fitted any where a vacuum booster will fit. It can use stainless braided hoses or rubber type and brackets are available for most applications.
This power brake booster uses fluid pressure from the existing power steering pump. The average power steering pump puts out from 800psi to 1400psi. The Hydro-Boost® uses this pressure to convert to pressure to apply against the master cylinder. Improving stopping performance and driver feedback tremendously.

Kit includes:

  • Hydro Boost power brake booster
  • Industry standard mounting plate 3.375" x 3.375" bolt pattern
  • Industry standard 3/8"-24 threaded pedal push rod 

Steering hose hookup kits available in the Suggested Parts below. These are remanufactured Bosch Hydro-Boost® units. These are not chinese imported units commonly found. Hydro-Boost® is a registered trademark of the Robert Bosch Corporation

Suggested parts

Customers also bought