Home :: Brakes :: 1960-87 CHEVY-GMC C10-C15-C20 Truck :: Power Brake Boosters :: 1967-72 CHEVY TRUCK AND GMC TRUCK, HYDRO POWER BRAKE BOOSTER KIT (HB6772)

1967-72 CHEVY TRUCK AND GMC TRUCK, HYDRO POWER BRAKE BOOSTER KIT (HB6772)

1967-72 CHEVY TRUCK AND GMC TRUCK, HYDRO POWER BRAKE BOOSTER KIT (HB6772)
SKU
HB6772
Weight
35.00 lbs
Our price:
$499.99
Year of Vehicle/Model
Brake Hoses/Fittings
Chrome Lid/Prop Valve
Qty
Our Hydroboost is even smaller then the 7" or the 8" vacuum booster in use currently.

It can generate 1200 to 2000psi to the calipers and fits a 1.00" bore size master cylinder.

The Hydroboost is powered by hydraulic pressure from the power steering pump. It requires 'no vacuum'. This has several advantages. No external vacuum pump required on low vacuum high performance motors. No 'small bore' master required. Firewall and valve cover clearance is increased. Frame mounted clearance is increased.

Frame mounted Hydroboosts are the same width as a master cylinder, giving additional exhaust clearance.

The Hydroboost can be fitted any where a vacuum booster will fit. It can use stainless braided hoses or rubber type and brackets are available for most applications.

The Hydroboost uses fluid pressure from the existing power steering pump. The average power steering pump puts out from 800psi to 1400psi. The Hydroboost uses this pressure that is always circulating through it, to convert to pressure to apply against the master cylinder. The output of the Hydroboost is affected by three factors.

1. The pedal ratio. We prefer that the pedal ratio be between 6:1 to 7:1.
2. The pressure output from the pump.
3. The master cylinder bore diameter. These are factors necessary to design the system that will work for a given application.

It is imperative that the system be clean. Any residual metallic sediment laying in an old pump or steering box, will be floated up and through the system when the fluid comes through on start up. If any of this sediment lodges in the relief valve of the pump, there will be no pressure from the pump. This will result in hard steering and no power brakes. A filter or a new system is required to maintain any warranty.

These carry a one year warranty. Any metallic residue found in the unit will void warranty.

To insure your advantage, you can contact our sales department @ 714-278-0098 / fax 714-278-0038.

Add $40 for chrome lid and prop valve kit.

Kit includes:
• Hydro Power brake booster
• Master cylinder
• Prop valve (disc applications only)
• Mounting brackets
• Prop valve bracket
• Prop valve lines
• Limited Lifetime Warranty

Stainless Hose kit with fittings sold separately, Add $259.95. Please specify.
Rubber Hose kit with fittings also available, Add $$209.99.