Skip to main content
Brake Instruction SheetsInstruction Sheets

Prop Valve Installation

By April 29, 2009March 13th, 20122 Comments

propvalve-install

2 Comments

  • merlin says:

    replaced power brake booster and proprortional valve and bought your diverter plug. bled the front disc but cannot bleed the rear drum rears. what do I do? can not bleed anything at the rears!

    • admin says:

      It is imperative that you bleed the rear brakes first or you will most likely never get the system to bleed. In order to do so now, you need to let the front brakes bleed off. This is done by placing some clear hose on the front bleeder screw and submerging the other end in a clean clear bottle filled about 1/3 full.Open the bleeder screw slightly and then go to the rear and start the bleeding process. Make sure that the front brake reservoir stays full with fluid.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.