Featured Vehicles

68 Charger powered by a blown 1000hp Ray Barton 426 Hemi @wilwooddiscbrakes @magnaflow exhaust. House of Kolor Kandy Violet. Riding on 24×8.5 and 24×12 wheels!! This thing is total tits!! It maybe non mainstream muscle but even with big wheels you can still make monstrous power and look dope as hell!! Props from my homie @evanevoyates from @ridesmag sending this in! Follow the crew @classicsdaily @moderndayhotrods @hotrodsandmusclecars #americanmuscle #charger #mopar #hemi

October 16th, 2014

http://ift.tt/1F75HAD shared by http://ift.tt/1xM4Z5A

1929 Ford Model A Tudor Sedan, “The Jewel” with a dual carbed ’50 Merc flathead. #drivehistory #classiccarsdaily

October 16th, 2014

http://ift.tt/1F75IEH shared by http://ift.tt/1xM4Z5A

@hoytcrouch’s 1959 Chevy! #chevy #truck #classicsdaily Follow the crew: @americanmusclehd @moderndayhotrods @hotrodsandmusclecars Follow @HolleyPerformance & @Hotchkis

October 16th, 2014

http://ift.tt/1wNFvVJ shared by http://ift.tt/1xM4Z5A

Disc Brake Bracket Kit, 1955-68 Chevy Car, Sm GM Caliper

October 16th, 2014

Make sure this kit fits your application before painting or plating.
Parts that have been painted or modified may not be returned.
1. Jack front of vehicle and support it properly with jack stands.
2. Remove the wheels, brake drums, hub assembly and backing plate assembly!
3. Clean and prep the spindle. See fig. #1.
4. Mount the caliper bracket onto the spindle using the supplied bolts and spacers in
the kit. (Note the brackets should face the rear of the vehicle and the spacers go
between the spindle & steering arm as shown in fig. #2 and #3. (58-64 vehicles
require the use of additional supplied spacer between caliper bracket and spindle).
5. Pack the wheel bearings with good quality disc
brake bearing grease and install the seals.
6. Install the rotor, outer bearing, retaining washer,
and spindle nut. Torque the spindle nut to
12ft/lbs while spinning the rotor, then back the
nut off to nearest slot and install cotter pin.
7. Install the grease caps, calipers and brake
hoses. Make sure the bleeder screws are on top
of the caliper.
7A. Due to the variations in brake pads, you may
need to modify the wear sensor to clear the
caliper mounting bracket.
7B. Due to steering arms being spaced inward toe in will have
to be set. We recommend 1/8” toed in. Also turn stops will
need to be modified to regain full trun radius.
8. You are done at the wheels. Enjoy!
Stock drum brake wheels may not work with
disc brake conversions. Drum brake wheels
were not made with disc brakes in mind, so
there may be wheel to caliper clearance
problems. Before installing this kit, make sure
your wheels fit the brake assembly.
For those of you wanting to keep stock wheels
that interfere with the installation, there are
companies such as the ones listed below that
can remove the original wheel centers and reinstall
them into a new disc brake rim. Please
contact them directly for more information.
Wheelsmith (714) 556-3861
Wheel Vintiques (209) 251-6957
Stockton Wheel Service (209) 464-7771
This kit uses:
1969-72 Chevelle or GM equivalent rotors.
1979-86 Malibu or GM equivalent calipers.
Inner bearing is an A-6 or set 6.
Outer bearing is an A-2 or set 2.
Grease seals are 7934S national.
Fig. #4
Anchor Bolt Spacer
(For use on 59-64 and 65-68 ONLY)
1955-68 CHEVY
Note: all brackets mount toward the rear of the vehicle.
©2003-14 Copyright. Performance Online, Inc.

70 Plymouth Duster with a bored out 340 small block mopar hooked to a 727 and a 8 3/4 rear with 3.55 gears. Koni shocks front and rear. Coy wheels. Painted PPG Viper Red!

October 14th, 2014

http://ift.tt/1qrlTTv shared by http://ift.tt/1xM4Z5A

And here’s a #transformationtuesday my little girl’s wagon .. good night

October 14th, 2014

http://ift.tt/1qrlTD9 shared by http://ift.tt/1xM4Z5A

Who’s a fan of the Mustang? #ford #mustang #classiccar #classic #performanceonline

October 14th, 2014

by @PerformanceOnline http://ift.tt/1z9uiV6

1964 Plymouth Belvedere. #moparmonday #mopar #moparornocar #classiccar #classic #plymouth #belvedere #automotive #restoration #americanmuscle #musclecar

October 13th, 2014

by @PerformanceOnline http://ift.tt/11fCOmr

One of my favorite Ford hot rods. #ford #hotrod #f100 #classic #classiccar #classictruck #performanceonline

October 12th, 2014

by @PerformanceOnline http://ift.tt/1vlJ5tg

Nice group shot with this Nova. #chevrolet #nova #chevy #musclecar #automotive #restoration #performanceonline

October 11th, 2014

by @PerformanceOnline http://ift.tt/1tluttT

1955 Chevy Nomad. Happy Friday! #chevy #chevrolet #nomad #trifive #belair #orange #performanceonline

October 10th, 2014

by @PerformanceOnline http://ift.tt/1C2NrEr

Throwback to when this sick SS showed up at our old shop in Fullerton. Don’t forget we’ve moved to Corona! #tbt #throwbackthursday #chevy #chevrolet #chevelle #ss #classiccar #classic #car #cars

September 4th, 2014

by @PerformanceOnline http://ift.tt/1nz2ejo

Clean Chevelle SS

August 24th, 2014

Clean Chevelle SS

via Tumblrhttp://ift.tt/1p5Kmlr

Need parts for your classic? Back to School Sale is on at PerformanceOnline.com. Don’t be late! #chevy #chevrolet #nova #ii #classiccar #classic #sale #automotive #musclecar #car #cars

August 18th, 2014

by @PerformanceOnline http://ift.tt/1sQqlkf

Mopar Monday. 69 Dodge Charger. #dodge #charger #musclecar #classiccar #classic #mopar #moparmonday

August 4th, 2014

by @PerformanceOnline http://ift.tt/1s8JV7y

Sweet chopped Ford F100! #ford #f100 #classicsdaily Follow the crew: @americanmusclehd @moderndayhotrods @hotrodsandmusclecars

August 1st, 2014

http://ift.tt/1AIGLxk shared by http://ift.tt/1xM4Z5A

Nice looking Chevy . Photo #repost @_killswitch_

August 1st, 2014

http://ift.tt/1kby2hY shared by http://ift.tt/1xM4Z5A

Clean ’66 Nova! I love how it sits. #chevy #nova #classicsdaily Follow the crew: @americanmusclehd @moderndayhotrods @hotrodsandmusclecars

August 1st, 2014

http://ift.tt/1kby0GU shared by http://ift.tt/1xM4Z5A

67 “G90″ Camaro powered by a 632ci Dart M block with a comp roller cam, Brodix heads, flat top diamond pistons and much more! This beast makes 811 hp and 804 ft lbs of tq. Bowler performance 4L85E and a Moser 9″ handles all that power to the ground. @ridetechsuspension shockwaves handle the ride quality! Follow the crew @classicsdaily @moderndayhotrods @hotrodsandmusclecars #americanmuscle #camaro

August 1st, 2014

http://ift.tt/1kby0GK shared by http://ift.tt/1xM4Z5A

@hagendabong’s 1971 Olds Cutlass Supreme with a 420hp 350! #olds #cutlass #classicsdaily Follow the crew: @americanmusclehd @moderndayhotrods @hotrodsandmusclecars

August 1st, 2014

http://ift.tt/1kbxZmo shared by http://ift.tt/1xM4Z5A