Front Disc Brake Kits

Disc Brake Bracket Kit, 1955-68 Chevy Car, Sm GM Caliper

INSTRUCTIONS 1955-68 CHEVY FULL SIZE CAR DISC BRAKE CONVERSION KIT (SM. CALIPER) (DB-5568) STEPS: READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THIS KIT. BEFORE BEGINNING INSTALLATION, MAKE SURE YOUR WHEELS FIT. Make sure this kit fits your application before painting or plating. Parts that have been painted or modified may not be returned. 1. Jack front more…

1955-57 PONTIAC FULLSIZE, disc brake conversion kit (lg. caliper)

Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified may not be returned. This Conversion Kit uses the following General Motors rotors and calipers: BUICK more…

1961-68 CADILLAC DISC BRAKE CONVERSION – #WBKS6168

INSTRUCTIONS Remove the factory drum brake assembly from the spindle. Make sure the spindle is clean and free of any dirt, grease or imperfections on the spindle pin. Note: It is not necessary to remove the spindle from the car to install the brake brackets. Un-bolt the factory steering arm from the spindle. Using the new hardware, more…

How to Remove ‘Shipping Bends’

Due to size restrictions set by the carrier, some of our longer front to rear fuel and brake lines must be temporarily altered for shipping. Whenever necessary, these large radius “shipping bends” are added to a straight section of the line, near the middle. This facilitates easily returning your fine lines reproduction to its proper more…

1970-74 E Body Plymouth & Dodge Front Disc Brake Kit

65-68 Chevy full size GM car (Lg. caliper), w/ 3/4” spindle nuts, Disc brake wheel kit

Part #(WBKS6568A) Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified may not be returned. This Conversion Kit uses the following components: Rotors 69-72 chevelle more…

65-68 Chevy full size car (Sm. caliper), Stock spindle disc brake kit

Part #WBKS6568 Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified may not be returned. 1. Jack front of vehicle and support it properly with jack more…

57-64 Ford 1/2 ton pickup, 5 1/2” bolt circle, Disc brake conversion kit

            Part #WBK5.5-5764 Read these instructions completely before installing this kit!!! NOTE: Before beginning installation, TAKE THE FRONT WHEELS THAT YOU ARE GOING TO USE AND MAKE SURE THAT THEY FIT THE ROTOR BOLT PATTERN, AND THAT THEY HAVE A LARGE ENOUGH CENTER HOLE. THESE ARE 11 3/4” ROTORS SO more…

55-64 Chevy full size car, Stock spindle disc brake kit (Lg. GM calipers)

Part #(WBKS5564A) Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified may not be returned. This Conversion Kit uses the following components: Rotors 69-72 chevelle more…

37-48 Ford passenger car & 37-56 Ford 1/2 ton pickup, 5 1/2” bolt circle, Disc brake wheel kit

Read these instructions completely before installing this kit!!! NOTE: Before beginning installation, TAKE THE FRONT WHEELS THAT YOU ARE GOING TO USE AND MAKE SURE THAT THEY FIT THE ROTOR BOLT PATTERN, AND THAT THEY HAVE A LARGE ENOUGH CENTER HOLE. THESE ARE 11 3/4” ROTORS SO YOU’LL NEED 15” WHEELS. Make sure this kit more…

49-59 Chevy/GMC truck, 6 x 5.5 Disc brake kit

Part #WBK6-4959 Steps: Read these instructions carefully! IMPORTANT: THIS KIT CONTAINS 12” ROTORS, THE ORIGINAL WHEELS MAY NOT FIT. PLEASE MAKE SURE TO CHECK WHEELS BEFORE ASSEMBLY, THIS WAY YOU WON’T BE DISAPPOINTED IF THEY DO NOT FIT. Jack front of truck and support the axle with jack stands. Remove the wheels, brake drums, hub more…

55-64 Chevy Fullsize car (Sm. caliper), Stock spindle Disc brake wheel kit

Part #WBKS5564 Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified may not be returned. 1. Jack front of vehicle and support it properly with jack more…

49-54 Chevy Car/53-62 Chevy Corvette, Disc brake conversion kit (Lg. caliper)

Part #WBKS4954 and #WBKS5362 Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified may not be returned. This Conversion Kit uses the following General Motors more…

49-53 Ford & 52-53 Mercury car, Disc brake conversion kit, 4.5 bolt pattern

Part # (WBKS4953) Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified may not be returned. This Conversion Kit uses the following rotors and seals: more…

60-70 Chevy Truck, Disc Brake Conversion Kit, 4.75 bolt pattern

View all of our Chevy C10 disc brake conversion kits and parts     For Part #‘s (WBK5-6062 & WBK5-6370) Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been more…

49-51 Mercury car, Disc brake conversion kit, 5.5 bolt pattern

Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified may not be returned. This Conversion Kit uses the following rotors and calipers: ROTORS: 94-06 Ford more…

1955-64 Chevy Fullsize, Disc Brake Conversion Bracket Kit (Lg. GM Caliper)

1955-58 FULL-SIZE CHEVY CAR 1959-64 FULL-SIZE CHEVY CAR Part #(DB5564A) CHECKLIST: • 5/8-18” x 1” Bolt • 5/8-18” x 1 1/4” Bolt • 7/16-20” x 2 3/4” Bolts • 7/16-20” x 2 1/2” Bolts • 1/2-20” x 2 1/2” Bolts • 7/16-20” Nylox Nuts • 1/2-20” Nylox Nuts • 5/8” ID x 3/8” Thick Spacers more…

48-56 Ford F-100, Disc Brake Conversion Kit (5X5)

Read these instructions completely before installing this kit!!! Before beginning installation, make sure your wheels fit on the disc rotor. This kit only works with wheels 15” and up , due to the 11 3/4” rotors. Make sure this kit fits your application before painting or plating. Parts that have been painted, plated or modified more…

47-59 Chevy/GMC Truck, 5 x 4.75” Disc Brake Kit

WBK5-4759 Covers both WBK5-4759 AND WBK5-475912 WBK5-475912 (shown) BRACKET MAY NEED TO BE CLEARANCED FOR PROPER FIT! STEPS: Read these instructions carefully! Jack front of truck and support the axle with jack stands. Remove the wheels, brake drums, hub assembly and backing plate assembly. Clean and prep the spindle. 4A) WBK5-4759 – Mount the caliper more…