Home Brakes :: 1960-87 Chevy, GMC C10, C15, C20 Truck :: Hydro Boost Power Brake Boosters :: 1960-62 Chevy, GMC Truck Hydro Boost Power Brake Booster Kit and Wilwood Master Cylinder

1960-62 Chevy, GMC Truck Hydro Boost Power Brake Booster Kit and Wilwood Master Cylinder

1960-62 Chevy, GMC Truck Hydro Boost Power Brake Booster Kit and Wilwood Master Cylinder
Hydro-Boost installation Instructions
Part #: HB-T6062WB
Weight: 30.00 lbs
Our price: $759.99
Master Cylinder
Qty
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

Our Hydro boost hydraulic brake assist power booster fits 1960-62 Chevy and GMC trucks and generates up to 1800psi of line pressure to the brake calipers. It is fitted with a Wilwood master cylinder and adjustable proportioning valve. This kit is powered by hydraulic line pressure from the power steering pump. Firewall and valve cover clearance is equivalent to a 7" diameter vacuum booster. The firewall brackets are correct for 1960-62 GM truck applications.

The average power steering pump puts out from 800psi to 1400psi line pressure. The Hydro-Boost® uses this to convert to pressure to apply against the master cylinder. This greatly improves stopping performance and driver feedback. These hydraulic power boosters can be easily installed on an existing vacuum booster vehicle or used to convert a manual brake setup to power with ordinary hand tools and average mechanical ability.

Fits: 1960 1961 1962 Chevy C10, C20 Truck, GMC Truck

Preassembled Kit includes:

  • Hydraulic brake assist power booster
  • 1.125" bore Wilwood master cylinder (available in black or bright finish)
  • Wilwood Adjustable proportioning valve, bracket and lines (works with front disc and rear disc or drum brakes)
  • Firewall Mounting brackets and plate
  • Limited Lifetime Warranty

Steering hose hookup kits available in the Suggested Parts below. These are remanufactured Bosch Hydro-Boost units.

Suggested parts

Customers also bought