Home Suspension Parts :: 1960-87 CHEVY-GM C10-C20 TRUCK :: Tubular Control Arms :: 1963-87 Chevy Truck Camber Correction Kit, For use with Tubular Control arms

1963-87 Chevy Truck Camber Correction Kit, For use with Tubular Control arms

1963-87 Chevy Truck Camber Correction Kit, For use with Tubular Control arms
Part #: S-6372
Weight: 2.00 lbs
Our price: $49.99
Qty
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

Most 63-87 Chevy and GMC lowered trucks require longer upper control arms when lowered with coil springs or you are forced to run longer upper control arm mounting studs, putting yourself at the risk of alignment shim fallout because so many shims have to be stacked to obtain a proper alignment. However, we have found that depending on where the truck was made and the condition of the frame, you actually wind up having too much positive camber when running a tubular upper control arm especially if the truck is not going to be lowered. These CAMBER correction spacers replace the factory upper control arm cross shaft spacers for optimum adjustability in your front suspension! Camber is restored and alignments are achieved. These spacers are over half the thickness of the factory items. So depending on your situation, these may be the answer to your needs.

  • Zinc coated to prevent corrosion
  • Helps obtain maximum front end alignment settings
  • Sold as a set.

Fits: 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevy C10, GMC C15, truck, Suburban and 2wd Blazer

Fits: 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer

Customers also bought