Home :: Brakes :: 1964-88 CHEVY CHEVELLE-EL CAMINO-SKYLARK-CUTLASS-GTO :: Master Cylinders and Kits :: Disc brake Master Cylinder and Proportioning Valve Kit, Aluminum Hybrid Type

Disc brake Master Cylinder and Proportioning Valve Kit, Aluminum Hybrid Type

Disc brake Master Cylinder and Proportioning Valve Kit, Aluminum Hybrid Type
SKU
AMCPVS-2
Weight
10.00 lbs
Market price:
$179.99
Our price:
$149.99
17%
Year of Vehicle
Brakes Type
Prop Valve Bleed Tool
Qty

The engineers at Performance Online, Inc. introduced a new direction to their expanding product line back in 2008, their then new all light weight aluminum disc brake master cylinder and proportioning valve kit has been a proven performance enhancer. These master cylinders are designed after the popular corvette style units used by many today.

Our master cylinder is available in 1.00" bore diameter and weighs 8lbs less than a comparable kit made of cast iron. Along with the weight savings you gain added performance and decrease stresses that occur when using an old style heavy iron master.

These master cylinders are put through an added process unique to Performance Online Inc. Each master cylinder, when completing the machine process is then sent to our machine shop for the burnishing process. Burnishing the cylinder wall removes and/or greatly reduces burrs, imperfections and micro machining chatter marks that occur in all machine processes. It also makes for a straighter cylinder wall. Most all other manufacturers skip this process to reduce cost and see up to 60% failure rate because the piston seals can not seat properly.

To top off this kit, our proportioning valves are hard anodized to increase longevity, have correct spring rates per GM specs, and each valve is pressure tested prior to being released for sale. All other manufacturers do not do any of the prior mentioned steps.

Master cylinder includes our unique bore adapter to allow for use on both power and manual disc brake applications.

These kits are available for all firewall mount setups.

Uses both Ford and Chevy mounting bolt patterns.

Kit includes:
• Master cylinder (New Light weight Aluminum design)
• Proportioning valve (aluminum)
• Proportioning valve bracket (chrome)
• Master to proportioning valve lines (steel)
• Internal low pressure light switch with wire and plug.

Please specify 2 or 4 wheel disc.

Related products

Manual Brake Master Cylinder Push Rod kit with Boot
$16.99

Customers also bought

1960-72 Chevy C10 Truck Rear Lowered Coil Springs
$99.99
1963-72 Chevy C10 Truck Upper Cross Shaft Assembly
$29.99
1960-72 Chevy Truck Trailing Arm Bushings, Polyurethane
$30.99
$68.99
Manual Brake Master Cylinder Push Rod kit with Boot
$16.99
Performance Online T-shirt, Black (each)
$14.99
1960-87 Chevy C10 Truck Disc Brakes Dust Shields, Set
$39.99
Western Chassis - 60-87 Chevy C10 Truck 2.5" Drop Spindles
$239.99
1960-72 Chevy C10-C20, Coil Spring Retainer Cup Kit, Rear
$19.99
1963-72 Chevy C10 Truck Trailing Arm Anti Squat Bracket Kit
$109.99