Steps: Read these instructions carefully! Make sure this kit fits your application prior to painting or plating. Parts that have been plated, painted or modified may not be returned.
INSTRUCTIONS
1. Lower shock mounts attached to the lower part of the axle and
are held by the rear U-bolt.
2. Remove original upper shock mount brackets. Position the new
shock bracket accordingly. Note if running power steering,
shock mounts must be located rearward of the axle.
3. The upper shock mount brackets mount on the outside of the
frame.
4. When positioning upper shock mount bracket, keep in mind
that the angle of the shock is critical for proper suspension
dampening. We recommend 25-30 degrees from vertical.
5. Enjoy your clean and easy shock mount kit!
Performance Online, Inc. / 714.278.0098 / fax 714.278.0098
1931 Sampson ave Corona Ca 92879 / www.performanceonline.com
Parts List:
2 ea Upper Shock Mounts
2 ea Lower Shock Mounts
6 3/8-16 x 1” Bolts
6 3/8-16 Nuts
6 3/8 Lock Washers
6 3/8 Flat Washers
Required Parts:
Shocks
