PERFORMANCE PARTS FOR YOUR CLASSICS!
714-278-0098
Home / Suspension Parts / 1960-91 Chevy, GMC C10, C15, C20 Truck / Tubular Control Arms / 1973-87 Chevy C10, GMC C15 Truck Tubular Lower Control Arms
Performance Online (POL)

1973-87 Chevy C10, GMC C15 Truck Tubular Lower Control Arms

1973-87 Chevy C10, GMC C15 Truck Tubular Lower Control Arms
1973-87 Chevy C10, GMC C15 Truck Tubular Lower Control Arms
Part #:TCA-L7387
$706.06

Details

Our 1973-87 Chevy and GMC truck tubular lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring. We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearence. Works with 2.5" drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.

Fits: 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer

Kit includes:

  • Gloss Black powder coat 
  • 1.250" x .188" DOM tubing
  • 2 Cross Shafts
  • 2 Ball Joints (If applicable)
  • Hardware
  • Limited Lifetime Warranty
  • Sold in pairs

Due to our improved design, these arm now require the use of our after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers.

Notes:

Due to our improved design, these arm now require the use of POL after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers. 
Manufactured in the USA
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

Suggested parts

Customers also bought